4x Sun Board Strip DIY Kit 384 Samsung lm561c LEDs Quantum Grow Light HLG Driver

Description

WHEN IT COMES TO GROW LIGHTING,
THE BEST OPTION AVAILABLE IS STRIPS
1) COVERAGE - make it any size/shape you want/even side lighting is possible
2) CANOPY PENETRATION - more leds spread out gets deeper into canopy
3) VERSATILITY - add on or reconfigure any time you want
We at GrowDaddyLEDs.com are committed to helping you
set up your grow with the largest and best selection of strips around.
With these complete DIY kits using Genuine Samsung lm561c LEDs, all you'll need is a drill, a 1/8" bit, wire strippers, and a phillips screwdriver to build a light up to 18" x 36".
THIS LISTING INCLUDES
:
4
- 30mm x 400mm Sun Board Strips with 96
Samsung lm561c LEDs
4 - 40mm x 450mm Heatsinks
TAPE PRE-APPLIED TO STRIPS
3 FT POWER CORD(6, 10, or 15ft available)
Your choice of two different Meanwell HLG drivers w/built in potentiometers for dimming
A) Meanwell HLG-120H-48A(150w+ at the wall)
B) Meanwell HLG-150H-48A(175w+ at the wall)
WAGOS for power cord and strip hookup
6 ft 18GA SOLID CORE WIRE
2 - 18", 24", 32", or 36" lengths of 1/2" ANGLE ALUMINUM in 1/16"(Choose in Item Length option)
SCREWS TO ASSEMBLE
ALL STRIPS
:
24V
44-48W max per strip
1800mA max per strip
30mm x 400mm each
Dual Connectors(easier to wire in series and/or parallel)
2oz RA Copper
EXTRUDED ALUMINUM HEATSINKS
:
40mm x 450mm x 10mm each
Over half a pound each
This listing is for 4 of these
30mm x 400mm (approximately 1.2 inch x 16 inches) 96 Diode Strips using the genuine Samsung lm561c diodes with their still awesome 210lm/w efficiency
,
4 of the hefty 40mm x 450mm
heatsinks to mount them on, aluminum angle(2 each of 18", 24", 32" or 36" length) to build a frame with and everything you need to get them growing, including y
our choice of two different Meanwell HLG drivers w/built in potentiometers for dimming. You can get either the Meanwell HLG-120H-48A(150w+ at the wall) or
the
Meanwell HLG-150H-48A(175+ at the wall), power cable for the driver and wago style connectors for hook up. We will also pre-apply 30mm double sided thermal conductive tape on the boards for you so all you will need to do is pull the release paper and press them onto your heatsinks for great holding power plus you gain the benefit of transferring the heat to the heatsink much better. All you will need is a drill and 1/8" bit, a good phillips screwdriver, and some wire strippers. The strips have the wire hook-ups on each end of the board making it so much easier and less messy to wire them in series, parallel, or however you need for your project. For the size, number of diodes, efficiency, versatility, and power capability, you won't find a better deal than these strips. They are rated at 24V and 1800mA max per strip and although they can handle a little more, they are much more efficient in the 1050-1400mA range. There are many other driver/strip configurations that work(too many for me to list), but just ask and I can recommend a custom kit for you and I will answer any questions you have or, since we have tons of drivers in stock, we can build you a custom DIY Kit. Check out my other listings for separate listings, different spectrums, mixed sets, sets with heatsinks, blue booster boards, red booster boards, or, if you need a different quantity or custom configuration, just let me know.
We always have discreet shipping and this is a private listing, so your purchase will remain anonymous on eBay.
What you get is in the description. Some photos may be stock or show other items for reference only. If you have a question, please ask before purchase.
IF YOU NEED MORE THAN QUANTITY LISTED, JUST MESSAGE ME AND I WILL INCREASE IT FOR YOU