SunBoard w/heatsink Samsung lm301h 3000 4000 6500k 660 IR UV Grow Light Strip

Description

WHEN IT COMES TO GROW LIGHTING,
THE BEST OPTION AVAILABLE IS STRIPS
1) COVERAGE - make it any size/shape you want/even side lighting is possible
2) CANOPY PENETRATION - more leds spread out gets deeper into canopy
3) VERSATILITY - add on or reconfigure any time you want
We at GrowDaddyLEDs.com are committed to helping you
set up your grow with the largest and best selection of strips around.
THESE ARE THE NEWEST 30MM X 400MM
96 LED STRIPS
WITH BOTH THE SAMSUNG LM301H AND LM301B IN A
PERFECT MIX OF SPECTRUMS ON THE SAME STRIP
ALL THESE STRIPS NOW HAVE RED AND IR WITH UV
AND IR
OPTIONAL
THIS LISTING IS FOR:
1 OR 3 - 30mm x 400mm Sun Board(s)
1 OR 3 - 40mm X 450mm Heatsink(s)
Option Available
:
30mm Double-sided thermal tape for easy installation (strong hold and great thermal conductivity)
CLICK HERE FOR THE LISTING WITHOUT HEATSINKS
Each Regular Strip Has:
56 - Samsung lm301b LEDs in 3000k
14 - Samsung lm301b LEDs in 4000k
14 - Samsung lm301h LEDs in 6500k
12 - 660nm Deep Red LEDs
Each Strip w/UV Has:
56 - Samsung lm301b LEDs in 3000k
14 - Samsung lm301b LEDs in 4000k
14 - Samsung lm301h LEDs in 6500k
4 - 660nm Deep Red LEDs
4 - 730nm Far Red(IR) LEDs
2 - 385nm UV LEDs
2 - 400nm UV LEDs
EACH STRIP:
30mm x 400mm(approximately 16" x 1.2")
24V
48w recommended max
1800mA recommended max
2 - DUAL CONNECTORS (easier to wire in series and/or parallel)
2oz RA Copper
EXTRUDED ALUMINUM HEATSINKS
:
40mm x 450mm x 10mm each
Over half a pound each
These are
30mm x 400mm (approximately 1.2 inch x 16 inches)
96 LED Strips and a hefty 40mm x 450mm heatsink to mount them on with the option of double-sided thermally conductive adhesive tape for each strip. Not only does it hold strong, it also helps transfer the heat from the board to the heatsink. Or contact me for a custom
Kit(we have drivers, frame rails, wire, screws, etc) for your tent, room, or closet.
These have the hook-ups on each end of the board making it so much easier and less messy to wire them in series.
For the size, number of diodes, efficiency, versatility, and power capability, you won't find a better deal than these strips. The 3000k is a good spectrum for budding/blooming. The 4000k is considered a great all around spectrum.
The 6500k is recommended for vegetation. Mixing spectrums like this gives you a much better coverage of the complete spectrum chart than any one spectrum can do alone. They are rated at 24V and 1800mA max per strip. They can handle a little more, but are much more efficient in the 1400mA range. They actually work amazing with a Mean Well HLG Driver with a constant current of 1400 and are highly efficient at this power. For example, a Meanwell HLG-120H-C1400B powers three or four of these strips nicely or an
HLG-320H-C1400B
can power up to eight or nine of them. Either of these also offers you dimming capabilities. There are many other configurations that work(too many for me to list), but plenty of resources out there to learn a little about wiring them different ways to help you decide which way you wanna set yours up. If you don't know any, just ask and I can point you to one or two great ones or answer any questions you may have. This is just for the strip and the option of pre-applied thermal tape and/or heatsink.
Anything else in the pics is for reference and not included. It just shows you a little of what can be done with these amazing strips. Only your imagination can stop you.
Check out my other listings for separate strips, different spectrums, mixed sets, sets with heatsink(s), blue booster boards, red booster boards, etc. If you need a different quantity, custom configuration, complete DIY kit for a custom light, just send me a message or give me a call. We always have DISCREET SHIPPING and this is a private listing, so your purchase will remain anonymous on eBay.
Please read description for what you will receive. Pics may be stock and show different items not included for reference of what you can build. If in doubt, ask first.